4 Tips for Maintenance of Ozone Plates for Your Air purifier

Do you want to produce ozone for cleaning the air in large spaces? Then ozone plates are going to be saviors. In an Ozone Blaster of 14g, ozone can be created by high voltage application to a metallic grid, between the two dielectrics. But if you want the proper functioning of an ozone blaster, you have to maintain its plates. So, check these tips to maintain the ozone plates for EcoBox.

1.      Cleaning the ozone plates

You can easily clean the ozone plates when you see the odors come through the plates. Every 3 to 4 months, the plates slide out of the ozone blaster and the plates make an invisible film. As a result of this film, the treatment of cleaning becomes less effective. In this condition, you can clean the plates by using some common household things such as bleach, vinegar, or detergent.

Furthermore, you can scrub the plates with a brush, rinse and then dry the plates. Do not forget to dry the plates before reinstalling them. At V.S.L.A., you can get high-quality ozone plates for EcoBox that can be fitted in almost every model of air purifiers such as Better Air, Alpine, Nature Air, Home, Lighting and others. Further, these plates are easily movable; hence, by cleaning and reinstalling the plates multiple times, you can use the old ozone generator for a long time. You don’t need to buy a new machine for producing ozone.

2.      Cleaning the plates with a solution of ammonia and water

The first step of cleaning the plates is the careful removal of the plates from the card cages through grasping the middle portions of the edge. After that, you can clean the plates with ammonia and hot water by mixing them in a 1:1 ratio. If required, you can apply a toothbrush to clean the edges of the Ozone plates. It can help you to scrub gently and avoid major fractures. You need to rinse the plates with hot water and allow drying completely. 

3.      Replacing the  ozone plates

With diligent maintenance and cleaning, you can use the same ozone plates from the ozone generator for around 7 years. At V.S.L.A, we supply easily replaceable ozone plates so that you can save your money as you don't need to buy ozone generators multiple times.

When you want to replace the plates, you can remove the old plates and slide in new plates. After that, with proper care and maintenance, you can use these plates for a good time. At V.S.L.A., you can get the ozone plates in different combinations such as 10 plates, 6 plates, 5 plates, 3 or 2 plates. The systems with ozone plates for EcoBox can easily remove bacteria and molecules that can cause aggravation and odor. As these machines are ready to use and updated, you can use our products for large spaces such as garages and office buildings.

If you want to buy ozone plates for EcoBox, contact us.

21356 Nordhoff St, # 110 Chatsworth, CA 91311

+ 1(323) 977-9277

EcoQuestUs@gmail.com